ETERNA ECUT 1060E Automatic Flatbed Diecutting & Creasing Machine with Stripping Station

Preloading system with either preloading rail cart or pallet jack to reduce down time.
Non-stop feeder with automatic pile lift.
Four pick up and four forward suction heads with angle adjustment.
Patented turbo spiral air blower for smooth sheet transport.

Slanted Feed Table to obtain stable and accurate registration especially for lightweight paper at high speed.
Side lays on both left and right hand sides push and pull convertible.
Sheet slow down device of feeding belts with selective on/off switch to ensure accurate registration of the sheet at front lays.

Pneumatic push button diechase locking mechanism to ensure safe and operator-friendly job change.
Gripper bar driving chain tension wheel to keep the tension constant.
Digital cutting pressure tonnage display with maximum pressure limit protection.
Seven high-precision alloy gripper bars. State-of-art 3 cam index gripper bar driving system to ensure smooth
and precise gripper bar intermittent movement.
Air blasting nozzle bar for stretching lightweight paper.

Triple action movement of the upper and lower stripping frames with lower spring loaded stripping pins.
Upper and lower stripping tool mounting frame can be pulled out for job setup.
Gripper edge removal system as standard.
Motorized upper frame suspending hoister.

Patent turbo spiral air blower pressing foot at feeder head.
Four pick up and four forward suck heads with angle adjustment.
Preloading device with rail cart and scaled gate.
Non-stop feeder with automatic pile lift.
Left and right side turbo air blower.
Motorized side adjustment of pallet table.
Electrical double sheet control.
Fine air blast at lead edge for smooth thin paper transport.
Sheet slow down device of feeder belts to ensure accurate position of the sheet to the front lays with selective on/off switch.
Synchronizing device to adjust the sheet positioning to the front lay by hand during production.
Bullet catcher on the feeder entrance.
Side lays on both sides push and pull convertible.
Electronic side lay control to check the sheet position.
Four individually adjustable front lays with dial read out at the operation side of the machine.
Two electronic front lay controls by means of Omron Glasfiber optik to control the sheet arrival.
Photo sensor safety barrier at pallet table floor level touching point.

Precision worm gear crank toggle driving system to ensure smooth and dynamic lower platen movement.
Precision stationery upper platen.
Sandwich hardened cutting plate.
Pneumatic push button diechase locking mechanism to ensure safe and operator-friendly changing of the die.
Pneumatic clutch/brake for main drive system.
Servo motor drive impression on/off by button.
Digital diecutting pressure tonnage display with maximum pressure limit protection.
Seven high-precision alloy gripper bar.
High quality pre-stretched gripper bar driving chain.
State-of-art 3 cam index gripper bar driving system to ensure smooth and precise gripper bar intermittent movement.
Torque limit safety clutch to protect the index driving system in case of gripper bar crash.
Double cam driven gripper opener and front lay swing frame without position restore spring for smooth and accurate sheet register and take off.
Air blasting nozzle bar for stretching the thin paper before die cutting.

Triple action movement of the upper and lower stripping frames with lower spring loaded stripping pins.
Motorized upper frame suspending hoister.
Upper and lower stripping tool mounting frame can be pulled out for job setup and make ready.
Remote control operation panel for jogging the upper frame up and down, easy and safe stripping tool setup and alignment.
Quick stripping tool exchange device (optional).
Mechanical disconnecting of lower stripping frame when it is not in use.

Automatic delivery with non-stop curtain. The curtain moves into the delivery to catch the arriving sheets during the pile exchange.
Five section brush brake each section angle adjustable individually.
Air blower to press down the sheets.
Rear and side joggers with easy position adjustment.
Gripper edge stripping and removing system with conveyor belt to remove the gripper edge waste sideways to the drive side.
Tape inserter with counter.
Safety device to prevent the steel pile plate from clamping on the foot when it reaches at ground level.