ETERNA ECUT 2100S Automatic Flatbed Diecutting
& Creasing Machine with Servo Drive Lead Edge Feeder
LEAD EDGE FEEDER
Dynamic torque servo motor-driven differential speed belt lead edge feeder with extended feeding table and side alignment
Imported top quality feeding belt for handling of warped corrugated board.
Pneumatic side push jogger (left and right side).
FRONT LAY & alignment guide
Sheet arrives at front lay with servo motor-controlled slow down action for precise registration.
Side alignment system to ensure the accuracy of side register.
DIECUTTING SECTION
7 pieces of gripper bar with 24 spikes per piece.
Safety door and diechase safety locking system to ensure safe operation.
Complete lost sheet control throughout the entire machine.
Centerline system compatible to Centerline II for quick change over and short setup time.
Air cushion underneath diecutting plate for easy cutting plate floating in and out.
STRIPPING SECTION
Centerline system with quick lock pins on upper frame.
Centerline system compatible to Centerline II for quick stripping die setup.
Motorized upper frame suspending hoister up to
500 mm.Lead edge removal system to remove gripper margin completely.
DELIVERY SECTION
Escalator delivery with non-stop air cylinder to protect the sheets from scratches.
Non-stop batch counter bundle delivery to ensure continuous productivity and operation efficiency.
FEEDER
Dynamic torque servo motor-driven differential speed belt lead edge feeder with extended feeding table and side alignment.
Imported high-quality feeding belt.
Pneumatic side push jogger (left and right side).
Left and right side guides, individually adjustable and register side at choice per box layout.
High vacuum blower with three sections vacuum each individually, air volume adjustable controlled by inverter. The section at two sides can be shut off for running small sheets.
Side alignment system with left or right angle degree and pressure adjustable rollers, alignment side at choice in accordance with the printing register side.
Height adjustable roller brush and rubber pressing wheels on the extended feeding table for better sheet control, especially for handling warped corrugated sheet.
Feeding stroke adjustment setting on LCD screen.
Sheet arrives at front lay with servo motor-controlled slow down action for precise registration.
DIECUTTING SECTION
Crank and worm gear toggle drive system for the lower platen.
Stationary high-precision upper platen.
Safety door and diechase safety locking system.
High-torque pneumatic clutch/break for positive clutch and reliable breaking.
Cutting pressure fine adjustment wheel with position indicator gauge and tonnage meter.
Overloading protection torque limit clutch.
State-of-the-art 3 cam index gripper chain drive.
Centerline system compatible to Centerline II, centers the cutting die and stripping die quickly and precisely.
7 pieces of gripper bar with 24 grippers per piece.
Sheet arrival and departure check photo sensor.
Left and right front lay locking blocks, separating and synchronizing adjustment available.
Self-diagnostic trouble display.
Digital speed display.
Automatic recycling lubrication system with oil pressure gauge and oil pressure switch.
Automatic main gripper drive chain lubrication.
Air cushion underneath the cutting plate for easy cutting plate floating in and out.
STRIPPING SECTION
Centerline system (compatible to centerline II).
Motorized upper frame suspending hoister.
Lead edge waste removal system.
Centerline system with quick lock pin on upper frame.
DELIVERY
Automatic delivery fork with non-stop air cylinder to protect the sheets from scratches.
The bundle delivery table can be prepared for future connection with breaker for in line operation (to be requested at order).
Electronic batch counter.
Spring-loaded adjustable chain tension back buffering wheel to maintain constant chain tension and smooth gripper bar movement.
Our Offices
North America Operations Headquarters
Canada
#1 - 1500 Valmont Way Richmond, British Columbia Canada, V6V 1Y4
Toll Free : (888) 853-4760
Local: (604) 278-2027
Fax: (604) 278-1005
Email: info@brausse.com
Northern
Division
USA
1650 West End Blvd. St. Louis Park, MN 55416
Suite 100
Toll Free : (888) 272-8773
Local: (952) 767-9725
Fax: (952) 767-9729
Email: info@brausse.com