ECUT 2100 SA ELITE

Automatic Diecutting & Creasing Machine with Stripping & Lead Edge Feeder

FEEDER

• Optional rear jogger at feeder, in preparation for future link-up with pre-feeder, to improve productivity and decrease labor cost.

• Pneumatic side push guide plates (left and right sides).

• Left- and right-hand side guides with separating and synchronizing adjustments available.

• Automatic pushing frame (optional).

DIE-CUTTING SECTION

• Die-cutting section safety door plus electrical and mechanical safety system;

• Motorized pressure adjustment system and indication of die-cutting pressure by means of digital readout.

• Optimized die-cutting section design with high-grade steel structure to stabilize the cutting operation and reduce make-ready time.

• Centerline system making the cutting die and chase centered quickly and precisely.

• Optional cutting plate pneumatic locking system.

STRIPPING SECTION

• Centerline system for quick upper and middle stripping die setup and change-over.

• Centerline system for quick stripping die set up and changeover, compatible with Centerline II.

• Fully open-type upper stripping frame, and front/back micro-adjustment system for upper stripping tools.

• Push button of gripper opening is added for easy removal of the production sample at stripping section.

• Front-edge waste removal system to fully remove all lead edge waste and transport it outside the machine.

FEEDER

• Dynamic torque servo motor-driven differential speed belt lead edge feeder with extended feeding table and side alignment.

• Imported high-quality feeding belt.

• Pneumatic side push jogger (left and right side).

• Left and right side guides, individually adjustable and register side at choice per box layout.

• High vacuum blower with three sections vacuum each individually, air volume adjustable controlled by inverter. The section at two sides can be shut off for running small sheets.

• Side alignment system with left or right angle degree and pressure adjustable rollers, alignment side at choice in accordance with the printing register side.

• Height adjustable roller brush and rubber pressing wheels on the extended feeding table for better sheet control, especially for handling warped corrugated sheet.

• Feeding stroke adjustment setting on LCD screen.

• Sheet arrives at front lay with servo motor-controlled slow down action for precise registration.

DIECUTTING SECTION

• Crank and worm gear toggle drive system for the lower platen.

• Stationary high-precision upper platen.

• Safety door and diechase safety locking system.

• High-torque pneumatic clutch/break for positive clutch and reliable breaking.

• Cutting pressure fine adjustment wheel with position indicator gauge and tonnage meter.

• Overloading protection torque limit clutch.

• State-of-the-art 3 cam index gripper chain drive.

• Centerline system compatible to Centerline II, centers the cutting die and stripping die quickly and precisely.

• 7 pieces of gripper bar with 24 grippers per piece.

• Sheet arrival and departure check photo sensor.

• Left and right front lay locking blocks, separating and synchronizing adjustment available.

• Self-diagnostic trouble display.

• Digital speed display.

• Automatic recycling lubrication system with oil pressure gauge and oil pressure switch.

• Automatic main gripper drive chain lubrication.

• Air cushion underneath the cutting plate for easy cutting plate floating in and out.

STRIPPING SECTION

• Centerline system (compatible to centerline II).

• Motorized upper frame suspending hoister.

• Lead edge waste removal system.

• Centerline system with quick lock pin on upper frame.

DELIVERY

• Automatic delivery fork with non-stop air cylinder to protect the sheets from scratches.

• The bundle delivery table can be prepared for future connection with breaker for in line operation (to be requested at order).

• Electronic batch counter.

• Spring-loaded adjustable chain tension back buffering wheel to maintain constant chain tension and smooth gripper bar movement.

TERMS AND CONDITIONS

INSTALLATION AND TRAINING

Equipment installation and operator training will be conducted by the Seller's technicians for a period not exceeding nine (9) calendar days, 8 hours per day. The Seller will cover the wages, hotel accommodation, and return airfare for the technicians during the installation period. Additionally, the Seller will be responsible for transporting the Equipment either to the Buyer's plant or rigger's warehouse. However, the Buyer will be accountable for other costs associated with installation, including rigging, site preparation, electrical connection to the Equipment, insurance premium for moving and rigging, and any additional expenses required for access to the premises.

The Seller will provide the Buyer with the necessary information for installation preparation, such as the foundation floor plan, power consumption and specifications, and required installation facilities. It is the Buyer’s responsibility to ensure that the site and electrical power supply are ready for installation and Equipment operation well in advance. The Buyer should also provide the materials for die-cutting make-ready, Equipment test running, and operation training at their own expense. In the event that these materials are not available at the time of installation, resulting in an extended stay for the Seller's technician, the Buyer will be responsible for covering the wages, hotel accommodation, meals, penalty of air ticket, and other related expenses incurred due to the extended stay. Training will begin right after installation, and this could include evenings and weekends.

APPLICATION AND PERFORMANCE

The Equipment is designed to perform various die-cutting jobs on a wide range of stocks. However, the Buyer must understand that the practical operation, performance, and applications, such as running speed and application of specific types of jobs, are influenced by external factors beyond the Seller’s and the manufacturer’s control. These factors include the nature of the stock, pattern and quality of dies, length of cutting and creasing rules, and more. To achieve high production and avoid unnecessary damage to the Equipment, the Seller and the manufacturer strongly recommend that the Buyer consults a professional die-cutting consultant or reach out to the Seller for guidance when dealing with unfamiliar job types on the Equipment.

WARRANTY

The Seller warrants that the Equipment will be free from defects in materials and workmanship when used properly and in accordance with the provided directions for a period of 12 months starting from either the 15th day of arrival at the destination or the date of arrival at the end user's premises, whichever comes first. In case of a breach of warranty, the Seller's remedy will be limited to the replacement of defective parts (mechanical and electrical), repair, and related labor. Consequential damages for breach of warranty, where the claimed loss is commercial, are excluded. No warranties, beyond those stated in writing, are expressed or implied.

The warranty mentioned above is the only warranty provided by the Seller for the specified Equipment in this Contract. No other warranties, whether statutory, written, oral, expressed, or implied, including but not limited to warranties of fitness for a particular purpose or merchantability, will apply.

PLEASE NOTE THAT THIS WARRANTY WILL BECOME VOID IMMEDIATELY IF THERE IS A BREACH OF CONTRACT BY THE BUYER OR IF THE EQUIPMENT IS MOVED, MODIFIED, OR UNDERGOES ANY MAJOR REPAIRS PERFORMED BY UNAUTHORIZED PERSONNEL WITHOUT THE SELLER'S WRITTEN CONSENT.