ETERNA ECUT 1450E Automatic Flatbed Diecutting
& Creasing Machine with Stripping Station

Four pick up and four forward-suck heads with angle adjustment for wide range of stock.
New belt swing feeding rollers ensure smooth feeding even with warped corrugated board.
Motorized movement of feeder pile table during production.
Fine air blast at lead edge for smooth thin paper transport.
Non-stop feeder with automatic pile lift.

Electrical double sheet detector.
Side lays on both sides, push and pull convertible depending on stock.
Sheet slow down device to ensure accurate position of the sheet arrival at front lays.
Special regulator to adjust sheet arrival timing at front lays while machine is running.

Accurate mobile platen position and pressure tonnage digital display for easy operation.
Overloading safety device to limit maximum operating pressure at 300 tons.
Four front lay stoppers each individually adjustable for a wide range of stock.
Gripper bar with individual position adjustment ensures precise sheet registration.
Pneumatic locking die chase frame.

Triple action stripping system to ensure clean and positive waste stripping.
Upper and lower stripping tool mounting frame can be pulled out for job setup and make ready.
300mm upper stripping frame raiser greatly enhances the operation space, more operator-friendly.

Automatic high pile delivery system.
Non-stop auxiliary delivery curtain for continuous production resulting in greater productivity.
Electrical batch counter and tape inserter come as standard.
Gripper edge removal system with transport belt to remove the gripper edge sideways to the drive side.
Blowing device to press down the sheets by means of adjustable bars.

Pre-loading device mounted at the front of the feeder.
Non-stop feeder with automatic pile lift.
Suction head with several adjustment possibilities to handle different kind of materials.
Two turbo blowers for positive separation of thin paper.
Motorized side adjustment of pallet table.
Pile adjustment during production.
Electrical double sheet control.
Fine air blast at lead edge for smooth thin paper transport.
Sheet slow down device of feeder belts to ensure accurate position of the sheet to the front lays.
Synchronizing device to adjust the sheet positioning to the front lay by hand during production.
Side lays on both sides adjustable for push and pull.
Electronic side lay control.
Four separate adjustable front lays with clock read-out system. Operation outside of the machine.
Two electronic front lay controls by means of Omron fibre optic sensors.
Safety device for lowering of pallet carrier.

Triple action movement of the upper and lower stripping tools.
Movement of the upper chase can be switched on and off electrically.
By means of remote control under the stripping device the upper chase can be moved up and down electrically to ensure a simple adjustment of the lower pins.
The under stripping movement can be switched off mechanically.

Automatic non-stop delivery with curtain. This curtain moves into the delivery to catch the stripped sheets during the exchange of the piles.
Blowing device to press down the sheets by means of adjustable bars.
Back and side joggers adjustable.
Gripper edge removal system with transport belt to remove the gripper edge sideways to the drive side.
Tape inserter with counter.
Safety device on lowering of the steel plate.